Aidan's loose oily bunghole actually runs a track lap
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,664
Total Cats: 3,013
I've got a gtx2867r but I'm not trading.
Maybe my shaft is tighter against the seals because it is a larger diameter.
It's a more snug press fit because my tolerances are tighter.
Needs a bit more of an interference fit.
Oohhh, Garrett!
Maybe my shaft is tighter against the seals because it is a larger diameter.
It's a more snug press fit because my tolerances are tighter.
Needs a bit more of an interference fit.
Oohhh, Garrett!
stop wasting time and remove the turbo already. that will once and for all confirm if it's engine or turbo.
heck, you can even just bolt an open header on there for the few hours it will take to diagnose the car
just .02
heck, you can even just bolt an open header on there for the few hours it will take to diagnose the car
just .02
If you didn't have a stock header laying around, could also just buy a flange/Vband and make a little turbo-bypass piece, so you can just unbolt the turbo, and swap in a pipe that connects the manifold to the downpipe, I've seen that done before and probably wouldn't take too long to fab.