aidandj

iTrader: (5)

HF camera is better than the ebay usb camera. But still not great.

When you arent sure if its carbon or fuckerd pistons.....








https://www.youtube.com/watch?v=GYgw...ature=youtu.be

turbofan

iTrader: (1)

looks like carbon.

Do you have oil drops in your coolant yet?

aidandj

iTrader: (5)

Dunno. Too hot to take the rad cap off haha.

aidandj

iTrader: (5)

More cylinder 1.

EO2K

iTrader: (37)

Good to see I'm rubbing off on you.

It appears, to my untrained eye, to be oil. Mine look similar to this with my amateur proctologist camera but I don't have pics. With your leaking valve stem seals and the fresh oil present on the piston tops, its going to be really hard to tell no matter what. Have you tried removing any of that schmoo yet?

aidandj

iTrader: (5)

naw. But I think im going to do valve stem seals sooner than I thought I would.

Really hope that is whats causing the oil on the pistons. Maybe its even what caused the det?

icantlearn

if only there was a way to stick something down there to touch the piston so you could smell the substance on said thing....

aidandj

iTrader: (5)

...why? Its either oil or fuel. And fuel would have evaporated.

EO2K

iTrader: (37)

Have you pulled the manifold yet to check the tops of the exhaust ports for oil? I know you've seen my pics.

icantlearn

I didn't think of the evaporation. My b.

aidandj

iTrader: (5)

Nope. I hate pulling the manifolds. I might try that tonight.

EO2K

iTrader: (37)

Yes, I know you don't want to pull the manifold. Maybe pop the vband and try ti stick the camera up the wastegate hole? That'll narrow it down pretty quick.

aidandj

iTrader: (5)

I'm going to pull the upper half of the intake mani and stick the camera in there.

EO2K

iTrader: (37)

Its a good plan, oil on the intake valves should show up pretty well.

aidandj

iTrader: (5)

No idea if this means anything. Can't really tell.

bahurd

iTrader: (8)

Odd, looks like there's oil in the intake stream. The outside of the guidses are wet from oil but the valve stems look clean.

codrus

It could be coolant.

--Ian

aidandj

iTrader: (5)

Coolant also probably would have evaporated.

icantlearn

but you might be able to slightly smell it.

aidandj

iTrader: (5)

Probably could. I'll change valve stem seals when they show up tomorrow. If that doesn't get rid of the smoking i'll just get used to smoke I guess.