1.6L 2560r record attempt
All-round "Good Guy"
Joined: Dec 2009
Posts: 1,036
Total Cats: 266
From: Brisbane, AUSTRALIA
Just to correct your Aussie slang, "Whacka Whacker" should be spelled "Wacker", or you could have equally used "******" which is more common these days.
Props for your use of the word "Drongo" in a previous post though - very "Ocker".
Props for your use of the word "Drongo" in a previous post though - very "Ocker".
Reply
0
0
Newb
Joined: Aug 2011
Posts: 39
Total Cats: -14
From: Brisbane
Whacka? Maybe he was talking about cricket?
Reply
0
0
Reply
0
0
It hasnt been dyno'ed because of a lack of AWD dynos around here, but its easily in excess of 600.
Reply
0
0
Thread Starter
Elite Member
Joined: Apr 2010
Posts: 2,826
Total Cats: 66
From: Newcastle, Australia
Mine was apart for two months for a bad oil pump and it took ~30 minutes for a couple of the lifters to pump up. It sounded a lot like a wrist pin/piston problem and not like lifters in the way I was used to hearing them. It sounded much worse than the lifter noise I am used to hearing. Let it idle a long time and see if it goes away. You'll be wanting to get it good and hot to check for leaks anyway.
Dyno booked in for next week.
Dann
Last edited by nitrodann; Feb 20, 2013 at 05:53 AM.
Reply
0
0
Thread Starter
Elite Member
Joined: Apr 2010
Posts: 2,826
Total Cats: 66
From: Newcastle, Australia
Bonus pics, now the splitter has been cut, the bar has been evened up and trimmed and the matching wheels.
A shot of brakes and arms and sways, these shocks are wrong, something to do with playing with his StupidCharger NA8. It runs tein monoflex.
Splitter, cut smoothed and painted, yes it will need to be cut further, at the track.
Bonus photos, repping mad tyte stance. (for humourless mods, this is a joke, dont warn me aboyt it)
Friday week is the dyno, for those playing at home, timeanddate.com will help you find your local time for results,
Dann
A shot of brakes and arms and sways, these shocks are wrong, something to do with playing with his StupidCharger NA8. It runs tein monoflex.
Splitter, cut smoothed and painted, yes it will need to be cut further, at the track.
Bonus photos, repping mad tyte stance. (for humourless mods, this is a joke, dont warn me aboyt it)
Friday week is the dyno, for those playing at home, timeanddate.com will help you find your local time for results,
Dann
Last edited by nitrodann; Feb 20, 2013 at 09:25 AM.
Reply
0
0
Reply
1
1
