I bet it's hitting the divider.

 

Sure you can send me extra money and I'll "get it done faster". muhahaha.

currently sitting on my *** waiting for kathy lee and hoda to come on, BTW.

 

Stop sitting on your ***. Move the TV to the garage so that you can weld while watching Kathy Lee.


I think I got my waste gate problem fixed. Basically when I bolted on the DP last fall I did not check to make sure that the flapper could open. It was hitting part of the DP pipe so it was forced closed. I loosened all the DRP bolts and moved the DP around so that the flapper could move freely. I then held it in that position and bolted it back on. Now the flapper moved freely. So I will drive the car some on Monday to test and make sure it actually works.

 

sounds like one hell of a tight fit downpipe, glad you got it fixed

 

Good luck

 

The waste gate works now. But spool is slower then I would like and it feels like a supercharger. Tim needs to hurry up with my absurdflow goodies so I can have a proper setup again.

 

you feel like a supercharger.

 

 

you are so lame haha. I try to take a bad pic so you feel silly posting it. ehh.

brad's so dreamy I guess.

I shoulda took a pic of the mild steel collector instead. haha.

 

betting you dont do a bachelor draft pick after the first episode.

 

Can't believe Emily is breaking up with Brad. WTF?!

 

I don't know what this sentence means.

 

Yeah, you don't want to know.


He's talking brackets, not for the Final Four, but for the Bachelor TV show.

 

not brackets. fantasy team.

 

Spool on the ChinaCharger is definitely a little slower then I would like. In a 4th gear pull in my 6speed I have 100kpa at 2800rpms and get to 200kpa at 5800rpms. It makes me a little sad. But damn does it still pull. I do not have VVT up and running yet so hopefully when I get that setup it helps the spool out a good bit.

 

200kPa at 5800rpm?!?!?! That is so fail. I don't remember which churbo you have, but a Garrett 3076 on a 1.6 gets that same boost levels at some 600rpm lower.

 

ChinaCharger 2870, It is fail. I am planning on setting up EBC hopefully this weekend and seeing if that helps spool any.

 

tighten the wastegate rod back up.

 

I'll back-up to your tightened rod.

 

What's those jagged spikes/drops in the duty cycle/pulse width?