Exhaust leak took 2 min to fix one my friend got over.

Car is currently at the exhaust shop and I am having the test pipe made. I have a tiny oil leak, but nothing that will prevent me from driving the car to the Mitty.

I think I should be getting the HAWTLANTA around 5pm.

 

yay lars. I taught you well.


remember when I drilled your oil pan back in the day?














































and your mom last night?!

 

I remember you leaving right after drilling oil pan and not helping with the rest of the install, but it is cool. I still got it working.

Also that will be $26.50 for last night with my mom. You know my paypal.

 

I'm a throw a baby into water and let it swim kinda guy!

 

oil leaks scare me...


Seen way too many cars burn from them.

Fix that ****.

 

This thread gets me hard.

 

This thread gets me blueballs.

 

well it wasnt a part that held him up, but high coolant temps. sounds like a leak somewhere, ill laugh if he just forgot to burp/fill the system.

 

burp was teh first thought i had.

 

Could need to be burped but was out of time. I had some place to be unlike you two. Radiator and overflow tank were full last night when I checked though

 

Resluts?

 

Literally just got in the door from the Mitty. Might go look at it after I take a shower.

 

post shower resluts?

 

I ate some food and put on a movie and passed out.

 

So I went out and burped the system today. I am positive that is all it needed. Now the cooling system works and temps do not go above 208.

I also hooked up VSS tonight. I will test it out tomorrow and see how well if it works or not. Then after that I guess I will need to setup my EBC and then boost control by gear.

On a different note. I took a video of my Tial BOV in action. The stopper thing seems to close sort of slow. Does it look normal to all the guys who have a tial BOV?

 

I've never seen a tial bov in action but i'd assume that's what it'd look like. It's a large diaphram so your little vacuum and that high flowing turbo will make it look like that. It snaps shut when you blip the throttle so you should be ok. Is it closed at idle?

 

It seems closed at idle, well not as closed as when I blip the throttle. It just takes a slight time to close after I am done blipping the throttle.

I have also never seen one and action and noticed it when I was burping my system. So I decided to take a video and see what the peanut gallery had to say about it.

 

BOV looks fine to me. I will double check mine but I think it is the same way.

You have a big fat bung for the signal source right?

 

Mine closes at a similar speed.

 

9/16 vacuum line is going to both the BOV and EWG.

Thanks, I just wanted to confirm. I actually expected the Tial BOV to be louder then it is. I like that it is not loud.