99mx5 EFR build
#221
Elite Member
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: Las Cruces, NM
Posts: 1,647
Total Cats: 524
Yup, its on the list. The turbo and manifold are easy to install as one piece in the engine bay. It's easier to remove the manifold from the engine than to remove the turbo from the manifold. The downpipe is also easy to connect to the turbo and it is just tied in place in the engine bay.
#223
Elite Member
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: Las Cruces, NM
Posts: 1,647
Total Cats: 524
I just went out to break the engine in. I used the FM break-in method. The engine runs smooth and feels great. I disconnected the coils and cranked the engine until I got oil pressure before starting it. So far, so good. I haven't found leaks of any kind.
#227
Senior Member
iTrader: (2)
Join Date: Sep 2009
Location: Edmonton, AB, Canada
Posts: 1,193
Total Cats: 29
I don't like you and I'll tell you why.
Because your doing what I'm supposed to be doing. I've had my car down for many many months sitting on it. Only last night did I start pulling wires and rad parts in prep to do what you've just done in a few weeks. I could have been driving my car by now but nooo, I had to keep putting it off!
Thanks for posting your progress it has been helpful in seeing the speed and ease of pulling a motor, prepping and putting back in. All the thread updates kept nagging at me to get started.
Hopefully I can get with the program and have my done shortly here. I'm going to document it as well.
I do appreciate you....I think it is just jealosy.....
Keep us posted the rest of the way!
#228
Elite Member
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: Las Cruces, NM
Posts: 1,647
Total Cats: 524
Thanks for the comments. The total downtime from popped motor to built engine and car running again was 23 days. I have learned many things along the way.
The biggest thing I learned was to be organized and finish each step as you go and double check before moving on to the next step. This avoids missing something that you have to go back by undoing things to get to it again. I put all nuts and bolts in baggies and labelled them. I also kept related parts together when I stored them.
The biggest thing I learned was to be organized and finish each step as you go and double check before moving on to the next step. This avoids missing something that you have to go back by undoing things to get to it again. I put all nuts and bolts in baggies and labelled them. I also kept related parts together when I stored them.