Rebuild all the salvage Miatas! ASS!
#2242
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
They did the windshield on my work 2005 F-250 back in the day. The replacement cracked in the corner shortly after the install and they fixed it again, no questions asked. Second one held up for 3-4 years until we got a new truck.
I can't fathom that you can't find a mobile glass shop anywhere.
I can't fathom that you can't find a mobile glass shop anywhere.
#2243
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>I haven't even looked. I've been too busy with other stuff. If I can just roll the car out saturday morning, and come back to it with glass on it that would be ideal.</p>
#2245
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Haha, no that is helpful. I had thought of safelite. Just hadn't had ed call them. He is driving like 12 hours right now and service is spotty, so no clue when he will actually be able to call them.</p>
#2246
Supporting Vendor
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,956
Total Cats: 1,008
<p>Are the MSM and 99/00 window switches different? Right now the passenger switch controls the drivers window and the passenger window is stuck trying to go down.</p>
#2247
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Yeah, don't leave that plugged in, it'll burn out the window motor.
The plug ant the switch are the same but you have to swap 2 wires. Check m.net for articles about retrofitting the NB2 window switch into the NB1. Once you figure out how to get the connectors out of the harness plug post a picture, because I cannot for the life of me figure out how to do it without destroying the connector.
The plug ant the switch are the same but you have to swap 2 wires. Check m.net for articles about retrofitting the NB2 window switch into the NB1. Once you figure out how to get the connectors out of the harness plug post a picture, because I cannot for the life of me figure out how to do it without destroying the connector.
#2248
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Ed picked windows down, so they are staying like that until he gets around to it.</p><p>Don't think the wideband is wired into the car, so no driving tonight. I have the energy/motivation to get this thing started, but not to get a wideband in.</p>
#2250
The fuel injector harness clips onto the fuel rail, IIRC. I don't remember if it's supposed to be on top or underneath.
The grounds attach to the top of the intake manifold. They're supposed to go under a bolt that's right next to the throttle body, that hole is stripped out on my car, so I flipped the bracket over and bolted it to the valve cover instead. You can see the bare hole right at the top of this photo though:
That's the ground for all of the electronic systems in the car, BTW, it does very strange things if it's loose.
--Ian
The grounds attach to the top of the intake manifold. They're supposed to go under a bolt that's right next to the throttle body, that hole is stripped out on my car, so I flipped the bracket over and bolted it to the valve cover instead. You can see the bare hole right at the top of this photo though:
That's the ground for all of the electronic systems in the car, BTW, it does very strange things if it's loose.
--Ian
#2251
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Ditched the plastic thing, it wasn't happening.</p><p>Thanks for the picture I think I know where it is. I have already found out avout the weird things it does.</p>
#2252
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>No dice.</p><p>There is positive pressure coming out of the intake manifold when cranking.</p><p>Here is the composite log. Everything look alright?</p><p><img src="https://cimg4.ibsrv.net/gimg/www.miataturbo.net-vbulletin/994x475/80-hukjfsh_6345bec9daf12589edc8d9d55752c5c0780ee954.p ng" title="" /><br /><br /> </p>
#2255
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Will try that. But TS is registering maybe 96kpa at min. Goes up to like 106kpa
<br />I'm going to compile a few things to try then head over.
<br />Good news is all spark and coils worked under output test mode.
<br />I'm going to compile a few things to try then head over.
<br />Good news is all spark and coils worked under output test mode.
#2256
I dunno what timing wheel setup you're running, or what ignition settings. But it's not a stock wheel since there's a ton of teeth showing up in that log. If you can't get it working, the stock timing wheels work perfect if that proves good enough.
#2259
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
****, I don't think MS supports that.
<br />Guess we need a stock NB wheel. The auction car may have one. It also may have been destroyed. I'll check when I go to my old house.
<br />Guess we need a stock NB wheel. The auction car may have one. It also may have been destroyed. I'll check when I go to my old house.